Installation service
Well water treatment installation
Installation of a treatment train built around your current laboratory test, staged in the correct order so each piece protects the next.
It starts with the test, not the equipment
We will not specify well treatment without a laboratory test no more than twelve months old. That is not a policy for its own sake. Two wells a mile apart can need entirely different equipment, and a system designed from assumptions rather than data is the most reliable way to spend money badly.
At minimum the panel covers total coliform and E. coli, nitrate, pH, hardness, iron, and manganese. Arsenic, radon, and PFAS are added where the local geology or nearby land use makes them plausible.
If you have no current test, that is the first visit. We can arrange sampling and explain what the results mean when they come back, before anything is quoted.
Why the order of stages is fixed
Each stage protects the next, so sequence is part of the design rather than an installation detail. Sediment removal comes first, because particles foul everything downstream of them. Oxidation and iron filtration follow, since iron coats a quartz sleeve and fouls softener resin.
pH correction precedes softening, because a calcite neutraliser raises hardness as it works and the softener has to be sized for the corrected water rather than the raw water.
Ultraviolet disinfection goes last, immediately before the water enters the house, so that the water reaching the lamp is as clear as the train can make it and nothing downstream can recontaminate it.
What we will refer elsewhere
We install treatment downstream of the pressure tank. Well construction, casing repair, pump work, and yield problems are a different trade with separate licensing in each state, and we refer those to a licensed well contractor rather than attempting them.
That distinction matters when a bacteria result is caused by a failed well cap or a cracked casing. Fitting a UV lamp over an unrepaired intrusion treats the symptom and hides the fault, and we will say so rather than taking the work.
Once treatment is running, retest. Then test annually, because a well changes with rainfall, with land use nearby, and with the age of its own structure.
What we need in place
These are checked at the survey rather than discovered on the day. Where something is missing it changes the scope, and we would rather price that honestly up front.
- A laboratory water test no more than twelve months old
- Access to the pressure tank and the line leaving it
- Power and a drain for backwashing stages and UV
- Wall or floor space of roughly 6 to 10 feet for a full train
Typical duration. 1 to 2 days depending on the number of stages
Permits and local rules
Well work itself is regulated separately in each state. We install treatment downstream of the pressure tank and refer well construction work to a licensed well contractor.
Equipment this covers
- Well water systems. A treatment train assembled around a current laboratory test, in stages.
- Ultraviolet disinfection. A lamp that inactivates bacteria, viruses, and protozoa as water passes through.
- Iron and manganese removal. Oxidation followed by filtration, sized to the form and concentration of iron present.
- Sediment filters. A mechanical filter that captures sand, silt, rust flakes, and other particles.
- Acid neutralisers. A calcite or magnesia bed that raises the pH of acidic water, which stops it dissolving copper out of the pipes it runs through.
Problems this service is usually booked for
- Iron and rust staining
- Sulfur smell
- Sediment and cloudy water
- Bacteria in well water
- Low pH and blue-green stains
Common questions
Why will you not quote without a laboratory test?
Because any quote without one would be a guess. Two wells a mile apart can need entirely different equipment, and there is no standard well package that addresses iron, bacteria, arsenic, and low pH at once. Specifying from assumptions is the most reliable way to spend money badly in this field, and it is how people end up with equipment that treats a problem they never had.
Do you work on the well itself?
No. We install treatment downstream of the pressure tank. Well construction, casing repair, pump work, and yield problems are a separate trade with its own licensing in each state, and we refer those to a licensed well contractor. That distinction matters when a bacteria result is caused by a failed well cap, because the repair comes first and filtration second.
Does the order of the equipment really matter?
Considerably, because each stage protects the next. Sediment first so particles do not foul anything downstream. Iron treatment before softening and before ultraviolet, since iron ruins resin and coats a quartz sleeve. pH correction before softening, because a neutraliser adds hardness. Ultraviolet last, closest to the house, so the water reaching it is as clear as the train can make it.
Other services
- Free water testing
- Whole-house filter installation
- Under-sink reverse osmosis installation
- Water softener installation
- Maintenance and filter replacement
- Repair, any brand
Where we work
We cover New Jersey, Pennsylvania, Connecticut, and New York. Because water quality is a local fact, our service area pages carry the utility, source water, treatment method, and reported contaminants for each town, with the report they came from and the year it covers.
Next step